SUCK
Standard and Unified Connector Kit
This standardises the connectors that connect all the boards on the stack together
This was done as a conclusion of RFC #202304162103
Layout
10x2 connector
Pinout
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
|---|---|---|---|---|---|---|---|---|---|---|
| A | GND | 3V3 | GND | 3V3 | GND | 5V | GND | 5V | GND | Bus voltage |
| B | GND | CAN high | CAN low | GND | GPIO | GPIO | GPIO | GPIO | GPIO | GPIO |
(left to right, topview)
The GPIO pins, should more accurately be labelled as unused or N/A. If these pins are used for any purposes, then they will be documented here.
Connectors
The physical header pins are non-reversible to ensure things aren't plugged in the wrong way.